Accredited calibration for laboratory, electrical, industrial and biomedical instruments, performed by ISO/IEC 17025 partner laboratories accredited by SAAC and IAS. Every instrument comes back with a traceable certificate that auditors, regulators and clients accept.
Instruments drift. A balance, pressure gauge, gas detector or patient monitor that is out of calibration can pass a bad batch, reject a good one, miss a hazard or put a safety limit in the wrong place. Usually nobody notices until an audit or an incident.
EnvironmSafe provides calibration through external partner laboratories accredited to ISO/IEC 17025:2017. Our principal partner is accredited by the Saudi Accreditation Center (SAAC) and the International Accreditation Service (IAS). A second partner laboratory, accredited by EA-JAS, adds biomedical, volumetric, analytical and gas-detection equipment. We are your single point of contact. We review your equipment, plan the schedule, coordinate the work and deliver the certificates. Each calibration is performed by the accredited laboratory, within its scope.
More than a hundred instrument types across twelve disciplines, for industrial, oil & gas, power, construction, laboratory and healthcare facilities. Each request is confirmed against the partner laboratory's accredited scope before we quote.
Handheld and bench instruments used by electrical, maintenance and instrumentation teams, from all major makes.
The reference instruments your own technicians use to test and calibrate other equipment.
Instruments used to test, commission and monitor power systems, substations and transformers.
Pressure instruments used in process control, testing and safety systems, from vacuum to high-pressure hydraulics.
Temperature and humidity measurement wherever product quality, storage conditions or process safety depend on it.
Portable and removable flow instruments for process, HVAC and testing work.
Laboratory and bench weighing instruments, and the reference masses used to check them.
Measuring tools and reference standards used in inspection, quality control and site surveying.
Hand tools and portable test equipment for workshops, construction and materials testing.
The instruments safety teams rely on to detect hazards and measure exposure in the workplace.
Volumetric and analytical instruments that laboratory results depend on, so your data stands up in audits and accreditation reviews.
Performance verification of portable medical devices for hospitals, clinics and laboratories.
We calibrate all major makes, including Fluke, Megger, Druck, Hioki, Kyoritsu and Testo. Instrument not listed? Send us the make, model and measuring range, and we will confirm whether it falls within the accredited scope before any work is agreed.
Some equipment is too large, too heavy or too permanently installed to send to a laboratory, and has to be calibrated where it stands. We are preparing to offer on-site calibration for it. If you need any of the following, tell us now and we will contact you as soon as it is available.
One point of contact, a clear plan and no surprises.
Send us your instrument list with the make, model and range of each instrument. We check every item against the partner laboratory's accredited scope and agree the calibration points and interval you need.
We confirm the scope and price, coordinate transport of your instruments to and from the partner laboratory, and schedule the work around your operations.
The laboratory calibrates each instrument against reference standards traceable to national standards and SI units. If an instrument is faulty or badly out of tolerance, you hear about it before anything else is done.
Each instrument comes back labelled, with a certificate and detailed results, ready for your quality system, auditors and regulators.
External partner laboratories accredited to ISO/IEC 17025:2017. Our principal partner is accredited by the Saudi Accreditation Center (SAAC) and the International Accreditation Service (IAS). A second partner laboratory, accredited by EA-JAS, covers additional biomedical, volumetric, analytical and gas-detection equipment. EnvironmSafe manages the service from start to finish and remains your point of contact.
Most of the range above is within the laboratories' accredited scope. Where an instrument or measurement point is not, we tell you before we quote, and the certificate marks it clearly as not accredited. You always know exactly what you are getting.
The instrument's identification, the reference standards used and their traceability, the measured results, the measurement uncertainty (k = 2, about 95% confidence), the calibration and due dates, and the environmental conditions at calibration. On request, it also states whether the instrument conforms to the manufacturer's specification.
In the laboratory. Instruments are sent to the accredited partner laboratory and returned with their certificates, and we coordinate the transport. On-site calibration of large and installed equipment is coming soon; see the list above to register your interest.
The default interval on the certificate and label is one year, unless you specify a different one. The right interval depends on the manufacturer's recommendation, how heavily and where the instrument is used, how critical its readings are, and what your quality system requires. We can help you set it for each instrument.
If an instrument is found faulty or well outside tolerance, the laboratory notifies us and we contact you before any further work. Calibration does not include repair; we will advise you on the options.
No. Pressure safety valves are set-pressure tested and certified on our own test bench as a separate service. See PSV Testing & Calibration. This service covers measuring and test instruments: the gauges, meters, sensors and analysers your readings come from.
